With over 20 years experience, Cytech Technical 2 & E-bike qualified, fully insured and using only quality, branded parts, we can get your bike running like new. A well maintained bike can last for decades, avoiding the outlay of purchasing new bikes, but is also good for the environment, as there is less demand on resources. Our range of bike servicing options below will have something to suit all budgets and requirements, if there is anything not mentioned, please ask.
Services can usually be carried out within a 1-2 day time frame, dependent on which level of service is required, bookings will be made for the next available date. Please note for e-bikes, we are only able to work on EAPCs (Electrically Assisted Pedal Cycles), within the UK law for riding on the highways, without additional tax and insurance (maximum of 250W motor and restricted to 15.5mph).
*Tube sealant offer applies to Schrader valve innertubes, or Presta with removable valve core, replacement prefilled Presta valve tubes available on request.
A standard service for 26" wheel size and above, including full inspection and safety check, advice on any replacement parts needed, tyres inflated to correct pressure, adjustment of brakes and gears, clean braking surfaces, degrease drivetrain and reapply oil to chain, seat post cleaned and re-greased, headset checked and torqued as required. Valve dust caps and crimped cable ends replaced as required.
Full inspection and safety check, advice on any replacement parts needed, adjustment of brakes and gears, clean braking surfaces, degrease drivetrain and reapply oil to chain, tyres inflated to correct pressure, seat post cleaned and re-greased, headset checked and torqued as required. Valve dust caps, gear/brake inner cables* and crimped cable ends replaced as required (galvanised cables included, Shimano stainless @ additional £5 each). All over wash, rinse and dry included as standard. ('Premium Plus' - For £102 + parts, all inner/outer cabling replaced, or brakes bled and bar tape/grips replaced)
Full inspection and safety check, advice on any replacement parts needed, adjustment of brakes and gears, clean braking surfaces, degrease drivetrain and reapply oil to chain. Tyre pressures checked/inflated to correct pressure, seat post cleaned and re-greased, headset checked and torqued as required. Valve dust caps, gear/brake inner cables and crimped cable ends replaced as required (galvanised cables included, Shimano stainless @ additional £5 each). Both wheels trued on a jig for lateral, rotational and dish alignment. All over wash, rinse and dry included as standard. ('Ultimate Plus' - For £144 + parts, all inner/outer cabling replaced, or brakes bled and bar tape/grips replaced)
Full inspection and safety check, advice on any replacement parts needed, adjustment of brakes and gears, clean braking surfaces, degrease drivetrain and reapply oil to chain. Tyre pressures checked/inflated to correct pressure, seat post cleaned and re-greased, all critical fastenings checked and torqued as required, all inner cables replaced and finished with crimped ends, valve caps replaced as required. Both wheels trued on a jig for lateral, rotational and dish alignment. Wheel hubs, headset and bottom bracket dismantled, cleaned, inspected and re-greased. Replacement bearings/parts at additional cost as required. All over wash, rinse, dry and silicone polish to frame included as standard. ('The Works Plus' - For £197 + parts, all inner/outer cabling replaced, or brakes bled and bar tape/grips replaced)
The Works & Premium Service carried out on your non electric bike, at approximately 6 month intervals (we recommend The Works service in Spring to inspect bearings, clean out any moisture and have your bike ready for the Summer season and the Premium service in Autumn to check wear over the summer usage and make any adjustments to make sure it is winter ready).
Don't have time to drop it off? We can collect from your address and drop off when finished (additional costs apply).
Own a summer & winter bike or do more than usual mileage? The Works Service carried out on both your non electric bikes, or twice a year on a single bike, at your choice of timing (we recommend Summer bike in Spring to inspect bearings, clean out any moisture and have it ready for the Summer season and in Autumn on your Winter bike to make sure it is winter ready).
Don't have time to drop it off? We can collect from your address and drop off when finished, just choose the shipped option at checkout, alternatively select collection if dropping off/collecting yourself.
Full inspection and safety check, advice on any replacement parts needed, tyres inflated to correct pressure, adjustment of brakes and gears, degrease and reapply oil to gears/chain, seat post cleaned and re-greased, headset checked and torqued as required. Valve dust caps and crimped cable ends replaced as required.. £29 for single gear bikes up to 18" wheel, £35 for multiple gears up to 24" wheel size.
A Basic or Premium bike service can be carried out at your home, for additional £17 within a 10 mile radius, £12 within 5 mile radius. Bikes can also be collected and brought back to our workshop for service or repair for the same costs per collection or drop off, contact us for larger distances. This service is not available for E-bikes.
Fancy upgrading to some wheels of your own design, have the speed wobbles or spokes coming loose? We can build or rebuild for you, for £49 per wheel plus parts, once assembled, they are trued on a jig for lateral, rotational and dish alignment, and spoke tensions checked and equalized. Wheel balancing is important for high speed stability and handling, as well as wear on bearings and required effort, the same goes for keeping wheels in true.
If you have purchased a new bike online, we can assemble and do a Pre Delivery Inspection for £49 (for external cable, mechanical brake bikes, POA for other bikes). Purchased components for a custom build? Want to upgrade a groupset or other components? We can quote to supply parts as well as taking care of fitting. Contact us to discuss your requirements and get a quote.
If you would like to understand more about bike maintenance, but aren't sure where to start, we offer 1 hour 1-2-1 sessions for £65. Examples of subjects that can be covered are General Cleaning & Drivetrain Maintenance, Changing Inner/Outer Cables & Bar Tape, Gear/Brake Setup & Adjustment. If you have a particular issue with your own bike, you can bring it along to work on. We can supply parts required at additional cost, labour will be included up to the hour (additional labour at £50/hr, complex repairs may require ordering parts in advance).
Hydraulic Brake bleeding - £22 per brake, inc. fluid
Hydraulic Brake fitting - £22 per brake, inc. fluid
Disc Brake Pad replacement/setup - £11 per calliper + parts
Rim Brake Block replacement/setup - £8 per calliper + parts
Chain replacement - £11 + parts
Cable replacement - £11 per cable, inc. galvanised cable and crimp end fitted
Cable replacement - £16.50 per cable, inc. Shimano Stainless Steel cable and crimp end fitted
Continental innertube replacement - £16.50 per wheel fitted
Tubeless Tyre set up - £22 each inc. fluid (rim tape & valves at additional cost if required)
Tyre replacement - £11 ea + parts (excluding tubeless)
Innertube Sealant - £22 for both wheels (Removable core valves only, prefilled tube £22 ea fitted)
Wheel True - £16 per wheel on jig, tyre on (lateral), £32 per wheel on jig, tyre off (lateral, rotational and dish)
All over wash with bike cleaner, rinse and dry - £11
Frame Protection Polish - £6
We also have many accessories and other replacement parts, such as handgrips, reflectors/lights, tyres and more listed in our SHOP pages, but for anything else not listed, please ask.
Copyright © 2025 Blue Horse Bikes - All Rights Reserved.
Powered by GoDaddy